3 thoughts on “What are the companies doing some gel machine equipment better?”
Francis
What I know is Shenzhen Shichun Intelligence. It has been more than ten years since I have done some gel machine equipment. It is still a listed company. The technology is famous in the industry. The products are relatively mature and the after -sales service is also very good.
The decorative machine equipment is the surface point and glue on the surface of the semiconductor, chip, communication product, etc., and set the supporting path programming according to a specific product to achieve a kind of automated point glue equipment that can achieve better bonding effects. , Noodles, arcs, irregular curves and other functions.
The dot machine, also known as glue machine, titer, glue machine, etc., is an automated machine that specifically controls the fluid and puts the fluid and coated with the internal product surface or the internal product of the product. Plastic machines are mainly used for glue, paint, and other liquid accurate points, injections, coating, and drips to each product accurate position, which can be used to achieve dots, lines, rounds, or arcs. The range of high -speed continuous glue stability/adaptation range is wide.
The ordinary dot -doting machine
1, controller -type dispenser:
Plastic machines, number rendence tapers, precision point adhesives, etc.
2, desktop type ductor:
Thenate -type ductors, desktop three -axis ductors, desktop four -axis dispensers, or desktop type automatic dispensers , 3 -axis flow water line dispenser, multi -header adhesive machine, multiple adhesive mouth adhesive, circular point -dotted machine, rotating shaft point -strenifier, speaker dot tape, mobile phone key point adhesive, cabinet dot machine, etc.
automatic dot -type adhesive
1, landing -floor automatic point -dotted machine
2, spray -coated automatic dispenser (this point adhesive machine uses spray Jelly valve, online operation, mainly used for PCB board three -proof paint spray, placing dust, moisture -proof, insulating effects)
3. The difference between the adhesive machine is that the conductive glue cutting surface of the orientation is distributed in a triangular distribution state, mainly used in electromagnetic shielding point glue)
4, fluorescent powder jet dicture machine, (this point adhesive machine is mainly the main adhesive machine mainly Used for the LED industry)
The dual Y -axis COG dicture machine
This container includes two sports platforms. Traditional spot adhesives generally contain only one sports platform. Each sports platform can generally be equipped with more than 5 dot heads to achieve a span -efficient leap -up improvement! It is suitable for LCD, liquid crystal module precision point glue, and the most widely used LCD screen in mobile phone LCD screens, PDA and other LCD screens!
The non -standard class
is to customize according to certain special requirements of the customer's product process. Such dotted machines often have higher development costs! With the general application of electronic glue, the application of point replenishment equipment will also be more widely and diversified. The point -tube technology of a single component is relatively mature, and its development direction is the automated assembly line and high -precision point glue process.
It in ordinary point -tube machines, such as some point -controlled controller, domestic imitation technology is very mature, market competition is very fierce, the price has fallen thousands of feet, and even hundreds of machines have appeared. However, the general accuracy of domestic dotted machines is not high, and the glue is not stable enough. In some high -tech industries, when it comes to buying a taper, it must only find the world brand. Therefore, in the high precision, people who have aspirations will work harder. When the market competition is fierce, only quality and services can make themselves stand out. In automation, domestic three -axis platforms, round -point glue machines, etc. have a history of development. If it is just ordinary accuracy, then use domestic tapers and platforms. There are also many manufacturers engaged in the production and research of these single -frame equipment, and the market competition is gradually fierce, but the space that can be excavated is still very large.
For dual -component's point -to -point equipment, this is a far -reaching field: a little bit of adhesive internationally, which is more than 100,000 and hundreds of thousands, so that many manufacturers look at it. Stop. There is still a large gap in the domestic dual -liquid machine technology, and the price is slightly lower, but the quality of the product needs to be further improved. With the increasingly widespread use of AB glue, the requirements of irrigation and other processes will also be higher. Dual -liquid point glue machines are another potential development field of the spot reelection machine industry. Looking forward to the efforts of people with aspirations.
The main brand
The United States: EFD, Asymtek, Camalot, LCC, etc.; Germany: et al.; n Asia: Yida (YD) Shichun (SECOND), OLKS (OLKS), Axxon axis self -control, YAMAHA, Dongguan Shengxiang
(SX), Ruixing Hi -Tech (RX), Dimai, Musashi, Alipa, South Korea, South Korea Japan's NLC, SES, China OUPEL, Axxon axis self -control, etc.;
China:
SECOND), OLKS (OLKS), Dongguan Shengxiang (SX), OUPEL, SES (SES), Twin (Twin), Shenzhen Bright (RX), Axxon Self -control of the axis.
What I know is Shenzhen Shichun Intelligence. It has been more than ten years since I have done some gel machine equipment. It is still a listed company. The technology is famous in the industry. The products are relatively mature and the after -sales service is also very good.
The decorative machine equipment is the surface point and glue on the surface of the semiconductor, chip, communication product, etc., and set the supporting path programming according to a specific product to achieve a kind of automated point glue equipment that can achieve better bonding effects. , Noodles, arcs, irregular curves and other functions.
The dot machine, also known as glue machine, titer, glue machine, etc., is an automated machine that specifically controls the fluid and puts the fluid and coated with the internal product surface or the internal product of the product. Plastic machines are mainly used for glue, paint, and other liquid accurate points, injections, coating, and drips to each product accurate position, which can be used to achieve dots, lines, rounds, or arcs. The range of high -speed continuous glue stability/adaptation range is wide.
The ordinary dot -doting machine
1, controller -type dispenser:
Plastic machines, number rendence tapers, precision point adhesives, etc.
2, desktop type ductor:
Thenate -type ductors, desktop three -axis ductors, desktop four -axis dispensers, or desktop type automatic dispensers , 3 -axis flow water line dispenser, multi -header adhesive machine, multiple adhesive mouth adhesive, circular point -dotted machine, rotating shaft point -strenifier, speaker dot tape, mobile phone key point adhesive, cabinet dot machine, etc.
automatic dot -type adhesive
1, landing -floor automatic point -dotted machine
2, spray -coated automatic dispenser (this point adhesive machine uses spray Jelly valve, online operation, mainly used for PCB board three -proof paint spray, placing dust, moisture -proof, insulating effects)
3. The difference between the adhesive machine is that the conductive glue cutting surface of the orientation is distributed in a triangular distribution state, mainly used in electromagnetic shielding point glue)
4, fluorescent powder jet dicture machine, (this point adhesive machine is mainly the main adhesive machine mainly Used for the LED industry)
The dual Y -axis COG dicture machine
This container includes two sports platforms. Traditional spot adhesives generally contain only one sports platform. Each sports platform can generally be equipped with more than 5 dot heads to achieve a span -efficient leap -up improvement! It is suitable for LCD, liquid crystal module precision point glue, and the most widely used LCD screen in mobile phone LCD screens, PDA and other LCD screens!
The non -standard class
is to customize according to certain special requirements of the customer's product process. Such dotted machines often have higher development costs! With the general application of electronic glue, the application of point replenishment equipment will also be more widely and diversified. The point -tube technology of a single component is relatively mature, and its development direction is the automated assembly line and high -precision point glue process.
It in ordinary point -tube machines, such as some point -controlled controller, domestic imitation technology is very mature, market competition is very fierce, the price has fallen thousands of feet, and even hundreds of machines have appeared. However, the general accuracy of domestic dotted machines is not high, and the glue is not stable enough. In some high -tech industries, when it comes to buying a taper, it must only find the world brand. Therefore, in the high precision, people who have aspirations will work harder. When the market competition is fierce, only quality and services can make themselves stand out. In automation, domestic three -axis platforms, round -point glue machines, etc. have a history of development. If it is just ordinary accuracy, then use domestic tapers and platforms. There are also many manufacturers engaged in the production and research of these single -frame equipment, and the market competition is gradually fierce, but the space that can be excavated is still very large.
For dual -component's point -to -point equipment, this is a far -reaching field: a little bit of adhesive internationally, which is more than 100,000 and hundreds of thousands, so that many manufacturers look at it. Stop. There is still a large gap in the domestic dual -liquid machine technology, and the price is slightly lower, but the quality of the product needs to be further improved. With the increasingly widespread use of AB glue, the requirements of irrigation and other processes will also be higher. Dual -liquid point glue machines are another potential development field of the spot reelection machine industry. Looking forward to the efforts of people with aspirations.
The main brand
The United States: EFD, Asymtek, Camalot, LCC, etc.; Germany: et al.;
n Asia: Yida (YD) Shichun (SECOND), OLKS (OLKS), Axxon axis self -control, YAMAHA, Dongguan Shengxiang
(SX), Ruixing Hi -Tech (RX), Dimai, Musashi, Alipa, South Korea, South Korea Japan's NLC, SES, China OUPEL, Axxon axis self -control, etc.;
China:
SECOND), OLKS (OLKS), Dongguan Shengxiang (SX), OUPEL, SES (SES), Twin (Twin), Shenzhen Bright (RX), Axxon Self -control of the axis.
For such companies, Shichun Smart, this is OK, and there are many models, and the fields of application are wide.