When the shutters are installed, why do they never close? This is quite normal. Because the shutter curtain can move, it has to be re-angled to open.
1: After the shutters are installed, why can't they always close
Why do Plantation shutters never close after they are installed? This is a very common problem that many people have encountered. The main reasons are as follows: 1. Improper setting of shutter switch; 2. Power supply of shutter is not connected; 3. Poor contact or excessive length of signal cable connected with shutter; 4. The louver is damp, resulting in the loosening or falling off of the line; 5, blind indoor machine failure caused by misoperation. Here are some common mistakes that can be solved by a careful examination. If none of the above exist, then your system version may not be high enough. The solution is to upgrade to the latest version of the system.
2: How to solve this problem
Why do shutters never close after they are installed? This is a very common problem that many people have encountered. In fact, the blinds can be closed and opened normally. However, if you want to solve this problem correctly, you need to know how to set blinds properly first. First, make sure the blinds are properly installed. How will the blinds react after installation? When is it on? What should I do if I find that the blinds are not in the right place or are not functioning properly? Any of these factors can cause blinds to fail to open or close properly, so please review what you have installed and read the instructions carefully to make sure you fully understand the process. Let's find out what to do.
But if you want to use blinds, you need to readjust the problem. For example, you can change the Angle of the blinds by adjusting the switch on the curtain box, which is one way to open or close the curtains.